4.Press the Call Control Button on the headset. This will activate the Handset Lifter and lift the handset from the phone.
If you hear a dial tone, the lifter height is set correctly and needs no adjustment. Please continue with the next section “Mount the Lifter in permanent position”
on the following page.
Press Call
Control Button
5.If you do not hear a dial tone, the Lifter may not be raising the handset high enough OR the Configuration Dial may need adjusting. Continue to step 6.
6. Check the Lifter height adjustment by moving the Lifter Height Switch to a higher position. Repeat steps 2 through 4 as necessary.
If you hear a dial tone, the lifter height is now set correctly. Please continue with the next section “Mount the Lifter in Permanent Position”.
7. If you still cannot hear a dial tone, you will need to change the setting
on the Configuration Dial. Using a coin or paperclip, turn the Configuration Dial to a different setting until you hear a dial tone.
To view an interactive quick start guide online, visit www.plantronics.com/CS55.
Confi guration
Dial
Position Indicator
Multiple settings might work with your phone; however, only one is the optimal position.
If you still cannot hear a dial tone, please call Technical Support at
C. Mount the Lifter in permanent position
1. Remove the protective strips from the three mounting tapes on the underside of the Lifter.
2. GENTLY place the Lifter on the desk phone in the optimum position as determined above. Test the Lifter to verify positioning by pressing the Call Control Button on your headset to activate the Lifter and listen for a dial tone.
3. Press FIRMLY to adhere the Lifter to the desk phone.
Questions? For fast, efficient Technical Support call:
