2CONNECT Base to Desk Phone, Handset | Plantronics CS55 Series

S T E P

2CONNECT BASE TO DESK PHONE

Use Configuration A if:

You will use the Automatic Handset Lifter or…

Your phone has NO built-in headset functionality (no Headset button).

Configuration A

A

Handset

Coil Cord

1.Unplug the handset coil cord from the desk phone handset port [A], then plug it into the GREEN labeled handset port [B] on the Headset Base.

Handset

Headset Base (bottom view)

A B

2. Plug the short BLACK Phone Cable that is pre-installed on the Headset Base into the now-open handset port [A] on the desk phone.

4Plantronics CS55 Setup Guide

Image 4

Plantronics CS55 Series setup guide 2CONNECT Base to Desk Phone, Handset

Contents

Base Power Adapter HL10 Automatic Handset Lifter CS55 Headset Base CS55 Package Contents Speaker Ear Loop Headband 2CONNECT Base to Desk Phone Handset Configuration B Handset port or Headset port? 3CONNECT Power and Charge Headset Connect Headset Base to power outletCharge the Headset for at least 20 Minutes before using Base Power Adapter Connect Handset Lifter power cord to Headset Base Install Automatic Handset LifterAutomatic Handset Lifter Determine Lifter position and height setting Use the Extender Arm to Stabilize Handset if needed Confi guration Dial Position Indicator Mount the Lifter in permanent position Powering up the Headset Using Your CS55 Headset SystemTo Place, Answer, or End Calls Set Listening Volume Set Speaking VolumeTo Mute a Call Mute control Speaking Volume Minor Adjustment Control To set the IntelliStandTM FeatureIntelliStand Switch Indicator Lights Talking/Muted Green Power RED Charging AmberCS55 Lights and Tones Base Status System Reset Subscription Troubleshooting and Common Questions Additional Information and Support Still having problems? Plantronics Limited WarrantyMaintenance Battery replacement