Speaker Ear Loop, Headband | Plantronics CS55 Series specs

STEP1&ATTACHADJUSTHEADBANDFIT

Snap the speaker of the headset into the retaining ring of the headband or one of the three ear loops provided. See below.

Speaker

Headset

If you will be wearing the headband, adjust the band for the most comfortable fit. See 1 below.

1 1

For either wearing option, rotate the headset in the retaining ring until the microphone is pointed toward your mouth. See 2 above.

Questions? For fast, efficient Technical Support call: 800-544-4660 Ext. 5538 3

Image 3

Contents

CS55 Headset Base Base Power Adapter HL10 Automatic Handset Lifter CS55 Package Contents Headband Speaker Ear Loop Handset 2CONNECT Base to Desk Phone Handset port or Headset port? Configuration B Base Power Adapter 3CONNECT Power and Charge HeadsetConnect Headset Base to power outlet Charge the Headset for at least 20 Minutes before using Install Automatic Handset Lifter Connect Handset Lifter power cord to Headset BaseAutomatic Handset Lifter Use the Extender Arm to Stabilize Handset if needed Determine Lifter position and height setting Mount the Lifter in permanent position Confi guration Dial Position Indicator Using Your CS55 Headset System Powering up the HeadsetTo Place, Answer, or End Calls Mute control Set Listening VolumeSet Speaking Volume To Mute a Call To set the IntelliStandTM Feature Speaking Volume Minor Adjustment ControlIntelliStand Switch Base Status Indicator LightsTalking/Muted Green Power RED Charging Amber CS55 Lights and Tones Subscription System Reset Additional Information and Support Troubleshooting and Common Questions Battery replacement Still having problems?Plantronics Limited Warranty Maintenance