S T E P

4INSTALL AUTOMATIC HANDSET LIFTER

Why use a handset lifter? The lifter greatly simplifies using a headset with your desk phone. It lets you answer and end calls without being near your phone.

The HL10 Automatic Handset lifter is included with certain CS55 configurations and is also available separately.

A. Connect Handset Lifter power cord to Headset Base

1. Verify that the base-to-desk phone cable is connected to the handset port of the desk phone, and not the headset port (Refer to Step 2, Configuration A).

2. FIRMLY PRESS the Handset Lifter power cord into the RED labeled port to ensure a complete connection.

Automatic Handset Lifter

Headset Base (bottom view)

FIRMLY press Lifter power cord into RED labeled port on Headset Base.

Questions? For fast, efficient Technical Support call: 800-544-4660 Ext. 5538 7

Page 7
Image 7
Plantronics CS55 Series setup guide Install Automatic Handset Lifter, Connect Handset Lifter power cord to Headset Base