plawa-feinwerktechnik GmbH & Co.KG DC-735 manual Using the Macro mode

3. Shoot the image.

Each option automatically switches to single shot in the following situation:

yAfter each shot.

yWhen the mode switched.

yWhen the camera is turned off.

NOTE:

yWhen using the self-timer function, be sure to use a tripod or place the digital camera on a level, stable surface.

Using the Macro mode

Your camera is equipped with a macro function that allows you to focus on very close subjects. In macro mode you can focus on subjects 10 cm from the lens when in the maximum wide angle (zoomed out) setting and 80 cm in the maximum telephoto (zoomed in) setting.

1. Set the camera to the record mode

zYou can use the macro mode in still image shooting or movie recording.

2. Press the button to enter the macro mode.

yThe macro mode icon () appears on the LCD monitor.

3.To leave the macro mode, press the button again.

NOTE:

yDistances referred to measure the distance between the camera lens surface and the subject.

- 22 -