Hardware Description, Jumper | PNY P-DSA2-PCIE-RF guide

Hardware Description

Jumper	Jumper
	Settings

J8,J7, J6, J5

J8,J7, J6, J5

Aug/07

4

Active Port

Internal SATA Port D enabled (Con3) External SATA Port B enabled (Con2)

MN2036400001

Image 4

PNY P-DSA2-PCIE-RF user manual Hardware Description, Jumper

Contents

PCI Express Sata II RAID 2 CH External/ 2 Internal Card Connectors Features and BenefitsBus Interface Package Contents System Requirements Hardware Description Jumper Hardware Installation Auto configuration recommended Device ConnectionRAID Arrays RAID 0 Striping Select Auto configuration, then press Enter Manual configurationSelect Manual configuration then press Enter RAID 1 Mirror For New/Blank Hard Drives For Existing Hard Drives with Data Select Manual configuration, then press EnterSelect Create with data copy, then press Enter Select Create RAID Set press Enter Rebuilding a Failed Mirror SetSelect Rebuild Raid 1 Set, press Enter Deleting RAID Arrays Resolving Conflicts Bios Configuration Driver InstallationLow Level Format Logical Drive Info Installation. To make this floppy disk, copy the contents For Windows XP/Server At the Found New Hardware Wizard For Windows XP-x64/Server For Windows Vista For An Existing Installation For Windows Vista-x64 SATARAID5 Management Software Installation To Verify Windows InstallationSelect Device Manager TypeD\PCIIO\SiI3132\Driver\RAID\32-bitWindows SATARAID5Management Utility\3132-W-I32-Sm15141.msi, then For Windows XP-x64//Server 2003-x64/Vista-x64 Appendix a