10.Press Ctrl+E to exit the BIOS.
11.When asked Are you sure to exit(Y/N)?, press Y to exit and reboot.
12.Continue with steps outlined in Appendix A for formatting your hard disk drive.
RAID 1 (Mirror)
For New/Blank Hard Drives
1.As the BIOS boots press Ctrl+S or F4 when prompted to enter the RAID BIOS.
2.At the next screen select Create RAID Set, then press Enter.
3.At the next screen select RAID1 then press Enter.
4.Select Auto configuration, then press Enter.
5.Input the RAID size, press Enter.
6.When asked Are You Sure(Y/N)?, press Y to accept.
7.Press Ctrl+E to exit the BIOS.
8.When asked Are you sure to exit(Y/N)?, press Y to exit and reboot.
9.Continue with steps outlined in Appendix 1 for formatting your hard disk drive.
Aug/07 | 8 | MN2036400001 |
