2.Follow Microsoft’s Windows installation procedure.
3.Restart the computer when prompted by Windows’ installation.
4.At the Windows Setup screen, press Load Driver to install the RAID driver.
5.Insert the floppy disk, please select Silicon Image SiI 3132 SoftRaid 5 Controller (A:\si3132r5.inf), then press Next. (Change A:\ to match your floppy drive letter)
6.Follow the
For An Existing Installation
1.Setup the RAID Array prior to driver installation and boot up to Windows.
2.At Found New Hardware Wizard, select Locate and install driver software (recommended).
3.Please insert the provided driver CD into your
4.If the system prompts the user informing the drivers are not signed, select the option Install this driver software anyway.
5.Click Close to complete the installation.
Aug/07 | 18 | MN2036400001 |
