PNY P-DSA2-PCIE-RF user manual For Windows XP/Server, For New Installation

CD-ROM drives, uncheck the other boxes, click Next, then click Next again.

5.If the Digital Signature Not Found message appears, click Yes. Our driver has been thoroughly tested for stability and compatibility.

6.Click Next, then Finish.

7.Repeat steps 2-6.

8.Click Yes to restart to complete the installation.

For Windows® XP/Server 2003

For New Installation

A new installation requires a floppy disk for the driver installation. To make this floppy disk, copy the contents of

the “PCI_IO\SiI3132\Driver\RAID\FLOPPY” folder, found on the driver CD, onto a blank floppy disk then follow the directions below.

1.Setup the RAID Array prior to Windows installation.

2.Follow Microsoft’s Windows installation procedure.

3.Restart the computer when prompted by Windows’ installation.

4.At the Windows Setup screen, press F6 to install the RAID driver.

5.When prompted, press S to specify the location of the driver.

6.Insert the floppy disk, then press Enter.

Aug/07 14 MN2036400001