PNY P-DSA2-PCIE-RF user manual For Windows XP-x64/Server

7.Click Yes to restart to complete the installation.

For Windows® XP-x64/Server 2003-x64

For New Installation

A new installation requires a floppy disk for the driver installation. To make this floppy disk, copy the contents of

the “PCI_IO\SiI3132\Driver\64-bit Windows\RAID” folder, found on the driver CD, onto a blank floppy disk then follow the directions below.

1.Setup the RAID Array prior to Windows installation.

2.Follow Microsoft’s Windows installation procedure.

3.Restart the computer when prompted by Windows’ installation.

4.At the Windows Setup screen, press F6 to install the RAID driver.

5.When prompted, press S to specify the location of the driver.

6.Insert the floppy disk, then press Enter.

7.Select Silicon Image SiI 3132 SoftRAID 5 Controller (64-bit Extended), then press Enter.

8.Press Enter to finish driver installation, then follow the on-screen instructions to complete the Windows installation.

Note: If the Security Alert warning pops up, click Yes. Our driver has passed Microsoft compatibility test, this message appears during new

Aug/07 16 MN2036400001