ENGLISH
you may be experiencing cardiac arrhythmia. Most cases of arrhythmia are not serious, but consult your doctor nevertheless.
•A cardiac event may have altered your ECG waveform. In this case, consult your physician.
…exclamation mark and WearLink is displayed and your cycling computer cannot find your heart rate signal?
•Make sure the cycling computer is no further than 40 m/131 ft from the transmitter.
•Make sure the transmitter belt has not loosened during exercise.
•Make sure the textile electrodes in sports apparel fit snugly.
•Make sure that the electrodes of the transmitter / sports apparel are moistened.
•Make sure the transmitter / electrodes in the sports apparel are clean and undamaged.
•If the heart rate measurement does not work with the sports apparel, try using a WearLink strap. If your heart rate is detected with the strap, the problem is most probably in the apparel. Please contact the apparel retailer / manufacturer.
•If you have done all of the
…WearLink FOUND and WearLink TEACH? is displayed?
If you have purchased a new transmitter as an accessory, it has to be introduced to the cycling computer. For further information, see Using a New Transmitter (page 28).
If the transmitter you are using is included in the product set, and the text appears on the display, the cycling computer may be detecting the signal of another transmitter. In that case, make sure you are wearing your own transmitter, that the electrodes are moistened, and that the transmitter strap has not loosened.
...exclamation mark and Speed is displayed?
Make sure your speed sensor is positioned correctly. Rotate the wheel a few times to activate the sensor. The flashing red light indicates that the sensor is activated.
…exclamation mark and Cadence is displayed?
Make sure your cadence sensor is positioned correctly. Rotate the crank a few times to activate the sensor. The flashing red light indicates that the sensor is activated.
…exclamation mark and Power is displayed?
Make sure your power sensor is positioned correctly. For further information, see Power Output Sensor user manual.
...the altitude keeps changing even if I am not moving?
The cycling computer converts measured air pressure into an altitude reading. This is why changes in the weather may cause changes in altitude readings.
…the altitude readings are inaccurate?
Your altimeter may show faulty altitude if it is exposed to external interference like strong wind or air conditioning. In this case, try to calibrate the altimeter. If the readings are constantly inaccurate, dirt may be blocking the air pressure channels. In this case, send the cycling computer to a Polar Service Center.
...Memory full is displayed?
The message appears during training if no memory space is left for the training session. In that case, the cycling computer will overwrite the oldest training file. To save the training file for a longer period of time, transfer it to Polar web service at www.polarpersonaltrainer.com. Then delete the file from the cycling computer. For more information, see Deleting Training Files (page 17).
34Important Information
