Polar FS2, FS3, FS1 Care And Maintenance, Service, Taking Care of Your Polar Heart Rate Monitor

Models: FS3

1 25
Download 25 pages 51.37 Kb
Page 19
Image 19
5. CARE AND MAINTENANCE

5. CARE AND MAINTENANCE

Your Polar heart rate monitor is a high-tech instrument and should be treated with care. The suggestions below will help you fulfill the guarantee obligations.

Store your heart rate monitor in a cool, dry place. Do not store it in any kind of non-breathing material, such as a plastic bag or a sports bag if it is wet.

Service

During the two-year guarantee/warranty period, we recommend that your product is serviced by an authorized Polar Service Center only. The warranty does not cover damage or consequential damage caused by any service not authorized by Polar Electro.

Taking Care of Your Polar Heart Rate Monitor

Keep your unit clean. Clean it with a mild soap and water solution. Dry it carefully with a soft towel. Never use alcohol or any abrasive material such as steel wool or cleaning chemicals.

Never store the transmitter when it is wet. Sweat and moisture can keep its electrodes wet and the transmitter activated, which shorten the lifespan of the battery.

Keep your heart rate monitor out of extreme cold and heat. The operating temperature is 14°F to 122°F / -10°C to +50°C.

Do not expose the heart rate monitor to direct sunlight for extended periods, eg. by leaving it in a car.

Do not bend or stretch the transmitter. This may damage the electrodes.

Do not dry the transmitter in any other way than with a towel. Mishandling may damage the electrodes.

Transmitter Battery

The estimated average battery lifespan of the transmitter is

2500 hours of use. If you suspect that the transmitter battery has discharged, contact your authorized Polar Service Center for a replacement transmitter. Polar recycles used transmitters.

Wrist Unit Battery

The estimated average battery lifespan of the wrist unit is two years

with normal use (1h/day, 7 days a week). The Service indicates a low battery and that the battery should be replaced. Please note that excessive use of the alarm signal and the backlight (FS2/FS3) will drain the battery more rapidly. Do not open the wrist unit yourself. To ensure the water resistance properties and the use of qualified components, the wrist unit battery should be replaced by an authorized Polar Service Center only. At the same time, a full periodic check of the Polar heart rate monitor will be done.

Note:

In cold conditions, the low battery indicator may appear, but the indicator is deactivated when you return to a normal temperature.

Water resistance cannot be guaranteed after unauthorized service.

The sounds and the backlight FS2/FS3 are disabled when the battery is low, in order to optimize the battery lifespan.

20

Page 19
Image 19
Polar FS2, FS3, FS1 Care And Maintenance, Service, Taking Care of Your Polar Heart Rate Monitor, Transmitter Battery