ENGLISH
3. TRAINING
Wear the Heart Rate Sensor
Wear the heart rate sensor to measure heart rate.
1.Moisten the electrode area of the strap.
2.Attach the connector to the strap.
3.Tie the strap around your chest, just below the chest muscles, and attach the hook to the other end of the strap.
4.Adjust the strap length to fit tightly but comfortably. Check that the moist electrode areas are firmly against your skin and that the Polar logo of the connector is in a central and upright position.
Detach the connector from the strap and rinse the strap under running water after every use. Sweat and moisture may keep the electrodes wet and the heart rate sensor activated. This will reduce the heart rate sensor battery life. For more detailed washing instructions, see Important Information.
For video tutorials, go to http://www.polar.com/en/support/video_tutorials.
Start Training
1.Wear the training computer and heart rate sensor.
2.In Time mode press OK and select Start or
To modify sound, heart rate view or other training settings before recording your training session, select Training Settings. See Settings for more information
Your training session is recorded only if the stopwatch has been on for more than one minute.
Start Training With OwnZone
Starting every training session with the OwnZone guarantees safe and effective heart rate zones for your daily condition. Check your OwnZone at least
•when changing training environment or sport.
•when training for the first time after a week's break.
•If you have not recovered from the previous training or if you are not feeling well or are stressed.
•after changing user information.
Determining OwnZone limits take five minutes, and can be performed as a
If you have activated your training program and you actively use the OwnZone determination, the training computer unit takes into account your
1.Wear the training computer and heart rate sensor.
2.Press OK and select Start with OwnZone.
•Walk slowly for 1 min.
•Walk at a normal pace for 1 min.
8Training
