Polycom 1500 D manual Setting Up the Provisioning Server

Deployment Guide for the Polycom VVX 1500 D Phone

jAfter the reboot is complete, select General from the menu tab. A web page similar to the one shown below appears.

kMake the desired configuration changes.

For example, under Call Settings (scroll down on page shown above), change the Preferred Protocol for Protocol Routing to H.323 .

lIf you make any changes, scroll down to the bottom of the section.

mSelect the Submit button.

You can now instruct your users to start making H.323 calls.

Setting Up the Provisioning Server

The protocol that will be used to transfer files from the provisioning server depends on several factors including the phone model and whether the BootROM or SIP application stage of provisioning is in progress. By default, the phones are shipped with FTP enabled as the provisioning protocol.

You can use any computer on the network as the provisioning server (providing the application image and configuration files for the Polycom VVX 1500 D phone). For more information, refer to Setting Up an FTP Server on page B-1.

For organizational purposes, configuring a separate log file directory, override directory, contact directory, and license directory is recommended, but not required. The different directories can have different access permissions. For example, for LOG, CONTACTS, and OVERRIDES, allow full access (read and write) and for all others, read-only access.

2 - 10