LinkPlus Interface Guide: Siemens Hicom/HiPath optiset for SpectraLink e340/h340/i640 Wireless Telephones
OptiGuide menu
The OptiGuide menu provides access to features appropriate to the current context of the handset. You may navigate through the menus by using the default programming: FCN + * (Previous), FCN + 0 (Select), FCN + # (Next). Navigation and selection options should be programmed to the softkeys as described in the following section. To access the
In the Hicom 150 and HiPath 3000 systems the optiset E Basic telephone does not have OptiGuide
Prime Line impacts
If a handset is used in conjunction with an optiset desk telephone, each phone is configured on the Hicom CS as an independent phone with its own phone number (each device is assigned to a separate Prime Line). In order for both an optiset E telephone and a handset to ring together, the extensions need to be set up at the Hicom CS to ring at the same time.
A called party’s display of the originating line will be different when the handset makes the call compared to the optiset telephone. The name text could identify the source of the call to avoid confusion. For example, the display name of the handset could be stored as “Smith WT” at the Hicom CS. Display names should be kept to a minimum so the full name is displayed on the handset (see the SpectraLink Wireless Telephone section above for more details).
It should also be noted that the class of service (COS) of the handset is related to the Prime Line of the phone and not the line appearance.
Speed dial
Users should be made aware that stored speed dial and redial features will have to be saved separately for the optiset E telephone and the handset. Additionally, the Last Number Redial feature will only apply to the device from where the original number was dialed.
12 | PN: |
