GETTING STARTED
Your SpectraLink 8002 Wireless Telephone uses radio wave technology to send and receive voice and data transmissions. It is designed to operate much like a cell phone. However, the handset uses the private communication system installed in your facility and will not operate outside the area covered by this system.
The handset’s Battery Pack must be fully charged before its first use. Place the handset into the Charger for a minimum of two hours before using it for the first time.
Basic Operation
If you want to Then
Turn the handset on Press and hold the START key until two chirps sound.
Turn the handset off Press and hold the END key. One chirp will sound. If you are in a call, hang up first, then turn off the handset.
Unlock the keypad Press the Unlk softkey, then #.
Lock the keypad While in standby mode press FCN, then Select.
Place a call Press the START key and wait for a dial tone. Dial the numbers and listen for the ring to indicate the alerting of the called party. Note: Line 1 is the default line
4 | English |
