SpectraLink 8002 Wireless Telephone User Guide

are participating in a voice call on another line. If the Rsme (resume) softkey is pressed to activate a call on a newly selected line, any previous active call is placed on hold status.

Favorites menu

The Favorites menu provides access to a predefined list of dial numbers. The list is programmed by the system administrator and may include generic or specific entries. For specific entries, the user must provide a list of numbers to the system administrator for programming. Numbers on the Favorites list cannot be programmed in or through the handset by the end user.

The Favorites list can include either complete dial numbers for named parties or partial numbers that need additional data entry. Here is a partial entry example: If a PBX feature access code for call forwarding is defined in the Favorites list but you need to add the forwarding destination information before sending the call to the PBX to activate the feature.

To access the Favorites list, while in a dialing state press the Favr softkey to display a menu of pre-defined numbers or names that can be dialed (as programmed in the SIP TFTP configuration file.) When an item is selected from the list, the dial number is displayed. You may edit or add digits to the displayed number if necessary before pressing START to place the call. When using the Favorites menu to perform a blind transfer to someone on the list, select an entry from the Favorites menu and then press FCN and select Transfer.

FCN menu

Pressing the FCN key from the active mode displays a list of telephony options available to the user. Included here are transfer and do-not- disturb functions.

The FCN menu is accessible while in the active mode and provides these features:

Transfer

Do Not Disturb

Set/Clear Forward

<OAI>

<OAI>

<OAI>

22

1725-36027-001_C.doc

Page 22
Image 22
Polycom DCE101, DCE201, BPE101 manual Favorites menu, FCN menu