16Click the Save & Continue button.
During the initial RMX setup, if the system detects the presence of the RTM ISDN card, the ISDN /PSTN Network Service definition screens of the Fast Configuration Wizard are enabled.
If there is no RTM ISDN card in the RMX or if you do not want to define
an ISDN/PSTN Network Service, go to Step 32.
A new ISDN/PSTN Network Service can be defined even if no RTM ISDN card is installed in the system but only via the ISDN/PSTN Network Service
The Fast Configuration Wizard’s ISDN/PSTN configuration sequence begins with the ISDN/PSTN dialog box.
17Define the following parameters:
Field | Description |
|
|
Network Service | Specify the service provider’s (carrier) name or any |
Name | other name you choose, using up to 20 characters. |
| The Network Service Name identifies the ISDN/ |
| PSTN Service to the system. |
| Default name: ISDN/PSTN Service |
| Note: This field is displayed in all ISDN/PSTN |
| Network Properties tabs and can contain character |
| sets that use Unicode encoding. |
|
|
10
