Field | Description |
|
|
Num Plan | Select the type of signaling (Number Plan) from the |
| list according to information given by the service |
| provider. |
| Default: ISDN |
| Note: For E1 spans, this parameter is set by the |
| system. |
|
|
Net Specific | Select the appropriate service program if one is used |
| by your service provider (carrier). |
| Some service providers may have several service |
| programs that can be used. |
| Default: None |
|
|
Enter the prefix that the PBX requires to dial out. | |
| Leave this field blank if a |
| The field can contain be empty (blank) or a numeric |
| value between 0 and 9999. |
| Default: Blank |
|
|
20Click Next.
21In the Span Definition dialog box, define the following parameters:
Field | Description |
|
|
Framing | Select the Framing format used by the carrier for the |
| network interface from the list. |
| • For T1 spans, default is SFSF. |
| • For E1 spans, default is FEBE. |
|
|
Side | Select the RMX side on the network. |
| Default: User side |
| Note: If the PBX is configured on the network side, |
| then the RMX unit must be configured as the user |
| side, and vice versa, or both must be configured |
| symmetrically. |
|
|
12
