Polycom Installing SoundPoint IP 600 SIP, Connecting Network and Power Source, AC Power Option

Installing SoundPoint® IP 600 SIP

This section provides basic installation instructions and information for obtaining the best performance with the SoundPoint IP® 600 SIP telephone. If you require additional information or assistance with your new telephone, please contact your System Administrator.

The SoundPoint® IP 600 SIP User Guide includes regulatory compliance infor- mation that your System Administrator should review and can also be found at http://www.polycom.com.

Connecting Network and Power Source

AC Power Option

Connect the supplied Network cable between the LAN jack on the telephone and the LAN port on the wall or hub/switch device port. Connect the DC plug on the AC wall adapter to the DC jack marked on the telephone.

In-Line Power Option

If the telephone is connected to a compatible Ethernet switch that can provide in-line power, the telephone will use that power option. Simply plug the supplied Net- work cable between the LAN jack on the telephone and an available Power and Data port on the In-Line Power switch.

Cisco™ Catalyst™ In-Line

Power Switch

(Optional)

IEEE 802.3af compliant

In-Line Power switch

2