Polycom RAS200A manual Setting up MGC Devices, To add MGC devices, Go to Directory Setup Devices

Administrator’s Guide

In this screen, you specify the following information:

Item	Description
System Name	Defines the NetBIOS name of the Windows
	server. Must be between 6 and 16 characters
	long; dashes and underscores are valid
	characters.
IP Address	Defines the static IP address of the server.
Subnet Mask	Defines the network’s subnet mask for the
	server’s IP address.
Default Gateway	Defines the static IP address of the server’s
	gateway.
DNS Server	Defines the static IP address of the DNS server.
Current Date	Specifies the current system date of the
	Polycom RAS200A. If you change the date, the
	system date of the Polycom RAS200A also
	changes.
Current Time	Specifies the current system time of the
	Polycom RAS200A. If you change the time, the
	system time of the Polycom RAS200A also
	changes.
System Time Zone	Specifies the time zone in which the system
	resides.
Auto adjust for daylight savings	Select this check box to adjust the clock
	automatically for daylight savings time.

Setting up MGC Devices

To monitor and manage MGC devices, you must add them to the Polycom

RAS200A server.

To add MGC devices

1.Go to Directory Setup > Devices.

The List of MGC Devices screen appears. In this screen, you can add, change, delete, and update the status of MGC devices.

Note: The Polycom RAS200A only lists MGC devices that have registered with it. You manually register the MGCs by adding them to the List of MGC Devices screen.

2 - 6