FRAME SETUP OVERVIEW
The Frame Setup Menu allows configuration of the PPS, resolution, quality, and sensitivity of camera channels. When configuring the PPS sliders the BLUE slider represents the PPS the DVR will record during intensive recording and have available for transmitting to remotely connected systems. The RED slider represents the PPS that will be recorded by the DVR under normal recording conditions.
The total PPS of all blue sliders may not exceed the recording PPS of the DVR unit. The PPS of a red slider may not exceed that of the blue slider for the same channel. The dual sliders allow configuration of the DVR to record at a lower PPS while still being able to transmit at a higher PPS to remote connections.
Ex. If a camera channel is set to 25 PPS (blue) and 7 PPS (red), the DVR will record at 7 PPS and users viewing live video remotely can receive up to 25 PPS.
NOTE: The 4 Channel DVR only allows the user to select one frame rate for both recording and remote viewing.
Frame Setup (4 Channel)
Reset Default Settings
Video Format – NTSC/PAL
No. of Recording Frames Selected
Sensitivity
Frame Select | Video Quality |
| Recording Resolution |
Frame Select | Sets the PPS recorded by the DVR and available for viewing on a remote client PC |
|
|
Video Quality | Lower quality video has a smaller file size but appears more pixilated |
|
|
Sensitivity | Sets the Keyframe refresh rate. Adjusting this setting can have negative effects on video quality |
| NOTE: Do not change from default setting unless instructed by a system administrator. |
|
|
41
