MOTION SETUP
The DVR unit allows the user to adjust several different Motion Settings and create motion detection regions.
Apply current settings to all channels
Display full screen video
pop up on motion event
Beep on motion event
Display full screen video pop up on sensor event
Schedule recording at a regular specified interval
Create a Motion Region
1.Select a camera channel
2.Place the mouse pointer at the upper left hand corner of the area to designate, click and hold down the left mouse button, drag the mouse. Let go of the button when the box is the size desired.
3.Create up to five Motion Regions per camera. Resize and move them by dragging the sides and corners of the box.
4.Adjust the sensitivity of the motion area using the sensitivity slider.
5.Define the recording time for a motion event
Pre Alarm – 0 > 60 Seconds [The number of seconds the DVR records before motion is detected]
Post Alarm (MOTION) – 0 > 60 Seconds [The number of seconds the DVR records after motion is detected]
39
