Pontiac 2006 manual Setting Preset Stations

Setting Preset Stations

Up to 18 stations (six FM1, six FM2, and six AM), can be programmed on the six numbered pushbuttons, by performing the following steps:

1.Turn the radio on.

2.Press BAND to select FM1, FM2, or AM.

3.Tune in the desired station.

4.Press and hold one of the six numbered pushbuttons until you hear a beep. Whenever that numbered pushbutton is pressed, the station that was set will return and the equalization that was selected will be stored for that pushbutton.

5.Repeat the steps for each pushbutton.

Setting the Tone (Bass/Treble)

TONE: Press and release this button until BASS, MID, or TREB appears on the display. The SELECT LED indicator will light to show that the tone control can be adjusted. Turn the SELECT knob to increase or to decrease. If a station is weak or noisy, decrease

the treble.

Pressing and holding the TONE button until FLAT appears on the display will return all of the tone controls to the middle position.

EQ (Equalizer): Press this button to select customized bass, midrange, and treble equalization settings.

Up to six customized equalization settings, can be programmed on the six numbered pushbuttons, by performing the following steps:

1.Turn the radio on.

2.Use the TONE button and the SELECT knob to create the desired equalization.

3.Press and hold the EQ button for two seconds. SELECT EQ # will appear on the display and the EQ symbol will flash.

4.Press EQ or turn the SELECT knob to select the desired EQ number.

5.Press and hold the EQ button to store the equalization setting and the number. You will hear a beep and EQ SAVED will appear on the display.

6.Repeat the steps for the other EQ settings and numbers.

EQ 5 has been programmed at the factory for use with talk radio, but it can be set to a different tone.

3-56