Pontiac 2006 manual Setting Preset PTYs

To use the PTY interrupt feature, press and hold the P-TYPE button until you hear a beep on the PTY you want to interrupt with. When selected, an asterisk will appear beside that PTY on the display. Select multiple interrupts if desired. When listening to a CD, the last selected RDS station will interrupt play if that selected program type format is broadcast.

sSCAN t: Scan the stations within a PTY by performing the following:

1.Press the P-TYPE button to activate program type select mode. P-TYPE and the last selected PTY will appear on the display.

2.Turn the P-TYPE knob to select a PTY.

3.Once the desired PTY is displayed, press and hold either SCAN arrow, and the radio will begin scanning the stations in the PTY.

4.Press either SCAN arrow to stop at a station.

If both PTY and TRAF are on, the radio will scan for stations with the selected PTY and traffic announcements.

Alternate Frequency: Alternate frequency allows the radio to switch to a stronger station with the same program type. To turn alternate frequency on, press and hold AM/FM for two seconds. AF ON will appear on the display. The radio may switch to stations with

a stronger frequency.

To turn alternate frequency off, press and hold AM/FM again for two seconds. AF OFF will appear on the display. The radio will not switch to other stations.

Setting Preset PTYs

These pushbuttons have factory PTY presets. Up to

12 PTYs (six FM1 and six FM2), can be programmed on the six numbered pushbuttons, by performing the following steps:

1.Press AM/FM to select FM1 or FM2.

2.Press the P-TYPE button to activate program type select mode. P-TYPE and the last selected PTY will appear on the display.

3.Turn the P-TYPE knob to select a PTY.

4.Press and hold one of the six numbered pushbuttons until you hear a beep. Whenever that numbered pushbutton is pressed, the PTY that was set will return.

5.Repeat the steps for each pushbutton.

3-70