Pontiac 2006 manual Hydraulic Clutch, When to Check and What to Use, How to Check and Add Fluid

Hydraulic Clutch

The hydraulic clutch linkage in your vehicle is self-adjusting. The master cylinder reservoir is filled with DOT-3 brake fluid.

It is not necessary to regularly check the fluid unless you suspect there is a leak in the system. Adding fluid will not correct a leak.

The hydraulic clutch and brake master cylinder use the same reservoir.

A fluid loss in this system could indicate a problem. Have the system inspected and repaired.

When to Check and What to Use

The reservoir is located at the back of the engine compartment, on the driver’s side of the vehicle. See Engine Compartment Overview on page 5-12for more information

on location.

Refer to the Maintenance Schedule to determine how often you should check the fluid level in your master cylinder reservoir and for the proper fluid. See Part B: Owner Checks and Services on page 6-13and

Part D: Recommended Fluids and Lubricants on page 6-19.

How to Check and Add Fluid

Check to make sure that the fluid level is at or above the MIN mark. If the level is below the MIN mark, see the instructions on the reservoir cap.

5-25