Porter-Cable DVDR630VR manual Rear Panel, Important Note About Ferrite Core

Rear Panel

AERIAL

Connect the aerial to this terminal.

AC Power Cord	COMPONENT/PROGRESSIVE SCAN VIDEO OUT (Y Pb Pr)
	Connect to a TV with Y Pb Pr inputs.
Plug into the power source.
		AUDIO OUT (Left/Right)
		Connect to an amplifier, receiver or stereo system.
		EURO AV 2 DECODER
		Connect the audio/video output of an external source
		(Pay-TV decoder, Set Top Box, VCR, etc.).

AERIAL

RF.OUT

EURO AV 1 AUDIO/VIDEO

Connect to a TV with SCART jack.

COAXIAL (Digital audio out jack)

Connect to digital (coaxial) audio equipment.

VIDEO OUTPUT Switch

Select either COMPONENT VIDEO OUT or RGB signal of EURO AV1 AUDIO/

VIDEO terminal depending on how you connect the Recorder to the TV.

S-VIDEO OUT

Connect to a S-Video Input on TV.

RF. OUT

Passes the signal from the AERIAL to your TV/monitor

Important Note

About Ferrite Core

Be sure to attach the ferrite core to the power cord (for connecting to this unit).

This ferrite core can reduce noises.

1 Push the stopper [a] of the ferrite core to open.

2Wind the power cord twice on ferrite core.

3Close the ferrite core until it clicks.

1

[a]

2

Caution

Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit.

15