Porter-Cable DVDR630VR manual Operation with DVD and Video CD Playing a DVD or Video CD

Load your chosen disc in the tray, with the playback side down.

Operation with DVD and Video CD

Playing a DVD or Video CD

Playback Setup

Before using the remote control, press the DVD but- ton to select the device to be operated.

Turn the TV on and select the video input source con- nected to the Recorder.

Audio system: Turn the audio system on and select the input source connected to the Recorder.

1Press OPEN/CLOSE (Z) to open the disc tray.

2

3READING appears on the display window, and playback starts automatically. If playback does not start, press N (PLAY).

In some cases, the disc menu might appear instead.Press OPEN/CLOSE (Z) to close the tray.

ip

If a menu screen is displayed

The menu screen may be displayed first after loading a DVD or Video CD which contains a menu.

DVD

Use the b B v V buttons to select the title/chapter you want to view, then press ENTER to start playback. Press TITLE or LIST/DISC MENU to return to the menu screen.

VCD

Use the number buttons to select the track you want to view.

Press RETURN to return to the menu screen.

Menu setting and the exact operating procedures for using the menu may differ depending on the disc. Follow the instructions on the each menu screen. You may also set PBC to OFF under Setup menu. See page 30.

otes

–If Parental Control is set and the disc is not within the Rating settings (not authorized), the 4-digit code must be entered and/or the disc must be authorized (see “Movie Rating”, on page 26).

–DVDs may have a Region Code.

Your recorder will not play discs that have a region code different from your recorder. The region code for this recorder is 2 (two).

General Features

ote

Unless stated otherwise, all operations described use the remote control. Some features may also be avail- able on the Setup menu.

Moving to another TITLE 1/6

DVD +RW +R

When a disc has more than one title, you can move to another title as follows:

Press DISPLAY then use v / V to select the title icon. Then, press the appropriate numbered button (0-9) or b / B to select a title number.

Moving to another CHAPTER/TRACK

	4/26		1/4
DVD +RW		+R	VCD

When a title on a disc has more than one chapter/track, you can move to another chapter/track as follows:

Press PREV/NEXT ('b or B') briefly during playback to select the next chapter/track or to return to the beginning of the current chapter/track.

Press PREV ('b) twice briefly to step back to the pre- vious chapter/track.

To go directly to any chapter/track during playback, press DISPLAY twice. Then, use v / V to select chap- ter icon (or for a Video CD, select track icon). Then, enter the chapter/track number using the numbered buttons (0-9) or press b / B.

Search

DVD +RW +R VCD

1Press REW (m) or FWD (M) during playback.

The recorder will now go into SEARCH mode.

2Press REW (m) or FWD (M) to select the required speed: b (Reverse play), m, mb, mm, mmb, mmm (backward) or M, MB, MM, MMB, MMM (forward).

With a Video CD, the Search speed changes: m, mb, mm (backward) or M, MB, MM (forward).

3To exit SEARCH mode, press N (PLAY).

Still Picture and Frame-by-Frame Playback

DVD +RW +R VCD

1Press PAUSE/STEP (X) during playback. The recorder will now go into PAUSE mode.

2You can advance or back up the picture frame-by- frame by pressing b / B repeatedly during PAUSE mode.

3To exit PAUSE mode, press N (PLAY).

ote

The picture frame-by-frame in reverse is not available for Video CD.

ip

You can advance the picture frame-by-frame by press- ing PAUSE/STEP (X) repeatedly on the remote control.

34