20
Before Operation Initial Settings
In this menu system, there are several ways to cus-
tomize the settings provided. Most menus consist of
three levels to set up the options, but some require
greater depth for the variety of settings. If you press
SYSTEM MENU, only the first and second level of the
menu system will appear on the TV screen. The third
level can be displayed by pressing B. For navigating
the menu levels, you will see “B” on the right side of the
menu label to help you go to the next level.
To bring up and exit the Menu:
Press SYSTEM MENU to bring up the menu. A second
press of SYSTEM MENU will take you back to initial
screen.
To go to the next level:
Press Bon the remote control.
To go back to the previous level:
Press bon the remote control.

General Operation

11
Press SYSTEM MENU.
The Setup menu appears.
22
Use v/ Vto select the desired option.
33
While the desired item is selected, press Bto
move to the second level.
44
Use v/ Vto select the second desired option.
55
Press Bto move to the third level.
66
Use v/ Vto select the desired setting then
press ENTER to confirm your selection.
Some items require additional steps.
77
Press SYSTEM MENU to exit the Setup menu.
GENERAL

Auto Programming

This Recorder is equipped with a frequency
synthesized tuner capable of receiving up to 99 TV
channels.
Preparation:
Connect the Recorder to the desired type of aerial, as
shown in Connecting to the Aerial on page 16.
11
Press SETUP.
The Setup menu appears.
22
Use v/ Vto select the GENERAL option.
33
While the GENERAL option is selected, press B
to move to the second level.
44
Use v/ Vto select the Auto Programming
option.
55
Press Bto move to the third level.
“Start” icon is highlighted.
66
Press ENTER to begin the channel search.
The tuner will automatically cycle through all
available channels in the area and place them in
the tuner’s memory.
Auto Programming
Program Edit
Clock Set
TV Aspect
VCR Play Aspect
VCR Play System
AV2 Connection
Progressive Scan
Factory Set
11%
Stop