ASSEMBLY
1. Connect handle to frame.
2. Connect wand to gun. Tighten securely.
PCV2021 |
PCH2425, PCH2627, |
PCH3030 |
PCH2425, PCH2627, | PCV2021 |
PCH3030, PCH3540HR
To connect handle and hose reel to PCH3540HR:
a.Connect handle (a) and tube bracket (b) to frame using the hardware (c) supplied.
b.Assemble hose reel as described in the hose reel instruction manual.
c.Bolt the hose reel (d) to reel bracket (e) as shown. Tighten securely.
IMPORTANT: Read the hose reel instruction manual supplied for safety and operating instructions.
3.Attach high pressure hose to gun. NOTE: The point of attachment for the high pressure hose will differ depending on the model purchased. Tighten securely.
d
e
a
b
c
PCH2425, PCH2627, | PCV2021 |
PCH3030, PCH3540HR
4.Add engine oil (supplied) to engine. Refer to engine manual supplied by engine manufacturer for procedure. Do not overfill. Use of a funnel is recommended.
NOTE: There will be a slight amount of oil in the engine from factory testing.
NOTE: The pump was filled with oil at the factory. There is no need to add oil at this time, see the Maintenance section of this manual to perform maintenance on this pump.
7 — ENG | D22885 |
