Part 8
required to support the system real time clock. The jumpers in this window are
designated for VGA port and COM port power supply function. Please consult
your dealer for technical support on setup of these jumpers. A new Lithium
battery can support the system RTC for about 3 years. After the battery is
nearly exhausted, the user must change a new battery otherwise the system
RTC and system configuration setup will be lost.
INSTALLING UPGRADE KIT Please follow the instructions in the manuals delivered with the side
mount upgrade kit: KP100, SD100, SD200 or BC100 and the rear top mount
upgrade kit PD302 to fit them in Jiva 5700G / Jiva 5800G construction.
The USB power arrangement in this system has been particularly
designed to help smooth start up of the fingerprint sensor in SD200.
WIRELESS PRINTER The whole Jiva series can access the Posiflex wireless thermal printer
PP7700. To do this, a wireless Dongle DG2000 for this printer must be
separately purchased and installed to one of the serial COM ports in Jiva
system. Please enable the + 5 V DC power support for this COM port. Notice
2 hooks on rear side of the Dongle and also 2 hooks on either top corner on
rear side of main unit of the Jiva system. Match the hooks to mount the Dongle
to either corner of the Jiva system. Should there be more than 2 Dongles to be
installed in the application for the advantage of several fixed predetermined
connections without need for connection alteration in process, the third Dongle
and afterwards have to attach to the appropriate positions by use of the self-
adhesive tape because Jiva series supports only 2 rear top corners with hooks.
The Posiflex wireless connection supports various application
environments from having single Dongle to control single wireless printer to
having single Dongle to control multiple wireless printers and further to having
multiple Dongles to control multiple wireless printers. Unlike usual wireless
printer solutions that requires the application software to use the printer server
in WLAN the Posiflex wireless connection supports a genuine virtual cable
connection thus supports the application software to use even the so-called
direct I/O method for controlling the printer. The user may install the relevant
driver prior to the application software if the software did not include the
Hooks On Rear Side Of Dongle
Hooks On Rear Side Of Jiva
Dongle Hooked On Rear Top
Corner Of Jiva System