PowerFile C200S Load/unload slot, Display window, Power button, Control function buttons, Eject

Instructions for Macintosh

PowerFile Changer front panel

The buttons and features on the front panel of the PowerFile Changer are described below.

Load/unload slot

This is the front slot where discs are loaded into and unloaded from the Changer. Discs must be loaded with the “data” side on the left and the “label” side on the right.

Display window

This two-line LCD readout displays unit status and messages.

Power button

This is the button that powers on and turns off the Changer.

Control function buttons

Many of the PowerFile Changer functions can be accessed by using the buttons on the Changer front panel:

Load

The Load button opens the “gate” in the load/unload slot in the front panel, allowing discs to be loaded into the Changer.

Eject

The Eject button directs the Changer to lift a disc out of the unit and place it in the load/unload slot for removal. (This action is referred to as "Unload" in the software commands).

Page 37