PowerFile C200S, C200 Studio, R200 manual Option B—Fromthe MediaFinder window

Instructions for Macintosh

Option B—From the MediaFinder window

1Select the disc you wish to unload by single-clicking on the disc name in the lower

portion of the MediaFinder window.

2Go to the Browser menu, then to the Changer Admin submenu, and select Unload Disc.

3The carousel rotates to place the disc at the load/unload slot, and the disc is lifted up and out for removal. (If the disc is not removed from the slot within approximately 10 seconds, it will be lowered back down into the carousel.)

4Note: You cannot unload a disc if it is in a drive. If you wish to unload a disc that is currently in a drive, follow the directions in “Unmounting discs from Changer drives,” in the previous section of this guide.

Page 49