Powermate P-FTT-160MD-[E] Periodic Maintenance Schedule Table, Save all instructions, service

Maintenance

• Save all instructions

A Maintenance Schedule

WARNING

Before performing any maintenance, turn engine off and remove the wire from the spark plug to prevent accidental starting and serious injury.

IMPORTANT: The warranty on this tiller does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, the operator must maintain the tiller as instructed in this manual, and only use genuine replacement parts. The following table lists required periodic maintenance.

PERIODIC MAINTENANCE SCHEDULE TABLE

Service Records-			After	After Every	After Every	After Every	Before		See
		Before	Every					Before
Fill in dates as you complete regular				25 Hours	50 Hours of	100 Hour	Each		Note
		Each Use	10 Hours					Storage
service				of Use	Use	of Use	Season		Below
			of Use
Check Engine Oil Level,		√					√
Fill to Proper Level
Check Connection of BOTH		√					√
Flameout Wire Connectors
Clean Debris From Unit		√					√	√
Lubricate All Pivot Points			√				√	√
Check Fasteners for Tightness			√				√		1
Check Drive Belts			√				√
Replace if Necessary
Check Tines for Wear or Damage			√				√
Replace if Necessary
Check Fuel Line				√			√
Replace if Necessary
Lubricate Wheel Axles				√			√	√
Check Spark Plug				√			√
Replace if Necessary
Change Engine Oil					√		√	√	2,3
Clean Air Filter				√			√		4
Replace if Necessary
Replace Spark Plug						√
Clean Combustion Deposits from						√
Cylinder, Piston, and Valves
CAUTION	IMPORTANT NOTES about Maintenance schedule

1.Re-check tightness of all fasteners after first 2 hours of initial use

2.Change engine oil after first 5-8 hours of initial use

3.Change oil every 25 hours if operating under heavy load or in high temperatures

4.Clean air filter every 10 hours if operating under dusty conditions.

WARNING

Use only GENUINE replacement parts. Other parts may damage the unit or result in injury.

Questions? Call Toll Free at 1-800-737-2112 15 Copyright © 2009 MAT Engine Technologies, LLC