![Assembly (Continued)](/images/new-backgrounds/99400/9940019x1.webp)
Assembly (Continued)
• Save all instructions
INSTALL THE TINES (See Figure 5a and 5b)
1.Slide the tines onto the tine axle. Install the internal tines first. Sharp edge of the tines should face down to till the ground. Tighten the M10x50 bolt with lock nut provided to secure the inside tines.
2.For wide 21” tilling, install the outside tines in the way that the long half of the tine pipe faces towards the inside tines. For narrow 16” tilling, install the outside tines in a way that the short tine pipe faces towards inside the tines.
3.Tighten the M8x50 bolt with the locknut provided to secure the outside tines.
If you need assistance or find any parts missing, CALL TOLL FREE:
Sharp edge of tine should face down to the ground.
Figure 5a
Sharp edge of tine should face down to the ground.
Figure 5b
Questions? Call Toll Free at | 9 | Copyright © 2009 MAT Engine Technologies, LLC |