Introduction
This manual is provided by WMH Tool Group covering the safe operation and maintenance procedures for a Powermatic Model 2800 Drill Press. This manual contains instructions on installation, safety precautions, general operating procedures, maintenance instructions and parts breakdown. This machine has been designed and constructed to provide years of trouble free operation if used in accordance with instructions set forth in this manual. If there are any questions or comments, please contact either your local supplier or WMH Tool Group. WMH Tool Group can also be reached at our web site: www.wmhtoolgroup.com.
Specifications |
|
Model Number | 2800 |
Stock Number | 1792800 |
Swing (in.) | 18 |
Maximum Drilling Capacity (in.) | 5/8 |
Chuck Size (in.) | 5/8 |
Spindle Travel (in.) | |
Chuck Distance to Table (in.) | 30 |
Chuck Distance to Base (in.) | 46 |
Table Size (LxW)(in.) | 16 x 14 |
Table Size Fully Extended (LxW)(in.) | 16 x 26 |
Spindle Taper | MT2 x JT3 |
Column Diameter (in.) | |
Range of Spindle Speed (RPM) | 400 to 3000 |
Base Size (in.) | |
Motor | TEFC, 1HP, 115/230V |
Overall Dimension (HxWxD)(in.) | |
Approximate Net Weight (lbs.) | 209 |
The above specifications were current at the time this manual was published, but because of our policy of continuous improvement, WMH Tool Group reserves the right to change specifications at any time and without prior notice, without incurring obligations.
6
