Operating Controls
Start/Stop
Power Indicator Light – The start switch has a power indicator lamp which is on whenever there is power connected to the Jointer, not just when the Jointer is running. Do not assume that no light means there is no power to the machine. If the bulb is bad, there will be no indication. Always check before use.
Do not rely that no light |
|
means no power to the machine. Always |
|
check for power first. Failure to comply may |
|
cause serious injury! |
|
Refer to Figure 30: |
|
Start – Press the green start switch. |
|
When power is connected to the machine, the |
|
green light is always on regardless of whether |
|
the Jointer is running or not. |
|
Stop – Press the red switch to stop. |
|
Reset – In the event that the Jointer stops | Figure 30 |
without pressing the stop button, as the result of | |
a tripped fuse or circuit breaker, etc.: |
|
Press red button to reset main switch. |
|
Press the green button to restart the machine. |
|
Safety Key |
|
The start/stop switch on the Jointer comes |
|
equipped with a magnetic safety key. When in |
|
place on the switch as shown in Figure 30, the |
|
magnetic safety key trips a relay which will allow |
|
the machine to start and stop when the |
|
respective switches are pressed. Being |
|
magnetic, the lock can be removed to make the |
|
machine inoperable and can be hidden for safe |
|
storage by attaching it to another magnetic |
|
surface. |
|
When using the Jointer, place the key on the |
|
switch cover lining up the arrow on the key with |
|
the REMOVE arrow on the cover. Then rotate |
|
the key so that the arrow lines up with the LOCK |
|
arrow on the cover. This will prevent the safety |
|
key from coming loose from vibration when the |
|
machine is in use. |
|
21
