Powerware 5115 ADDITIONAL UPS FEATURES, Voltage Configuration

C H A P T E R 4

This section describes:

SChanging the voltage configuration

SUsing the communication port

SThe Network Transient Protector

The DIP switches on the rear panel of each unit (see Figure 12) are used to configure the output voltage and input voltage range.

1.The UPS must be completely shutdown.

Turn the UPS off by pressing the button on the front panel and then unplug the UPS.

2.Set the DIP switches according to the configurations in Table 1.

3.Plug the UPS into a power outlet and press the button to turn the UPS on.

UPS Rear Panel

2 1

OFF

Figure 12. DIP Switches

Powerware® 5115 User’s Guide S www.powerware.com