Troubleshooting
Alarm or Condition | Possible Cause | Action |
|
3 beeps every 10 | Failed attempt to start the | Plug the UPS into a power outlet for 24 hours to charge | |
seconds. | UPS on battery. | the battery. After charging the battery, press and hold | |
|
| the | button for 3 seconds; then check the |
|
| indicator. | |
|
| If the | indicator still flashes, see “UPS |
|
| Maintenance” on page 17 to replace the battery. | |
Continuous beep. | The output wave is |
| abnormal while the UPS is |
| on battery. |
Shutdown is imminent. Save your work and turn off your equipment. Turn off the UPS. Contact your service representative.
Continuous beep. | The output voltage is below |
| or above the limit while the |
| UPS is on battery. |
Save your work and turn off your equipment. Turn off the UPS. Contact your service representative.
30 | Powerware® 5115 User’s Guide S www.powerware.com |