Owner’s Manual: User Identification 21
User Identification
On the EFX 5.25, you can set up a user identification key.
This user identification (USER) key enables the EFX to
identify you and the information you have stored in the
console. Once you configure your USER key, you can
personalize your exercise session and store information
about your preferred program, session time, weight, and
age.
The USER keys allow two people to customize, store, and
retrieve exercise session selections.
Initially, you must “set up a user” so the EFX can store
exercise session information associated with the specific
user key. Once you enter the requested information, it is
stored until you opt to change it. You can select the same
USER key again, and your user preferences will
automatically be re-instated. Refer to Setting Up a User.
Setting Up a User
To set up a user, select a user number by taking the
following steps:
1. At the Precor banner, press a USER key.
2. The display prompts you to enter a time, weight, and
age.
Use the arrow keys to answer each prompt, and then
press ENTER. With each successful entry, you move on
to the next prompt. After you enter the age, the display
indicates that the user setup is complete and resets to
the Precor banner.
To begin an exercise session using your USER key, refer
to Selecting a User Key.
Updating User Information
To update user information, take the following steps:
1. At the Precor banner, press and hold a USER key. A
welcome greeting scrolls across the display.
HEART RATE
USER
130
8
USER