Unpacking the 719e Independent Action Climber
All Precor products are thoroughly tested and inspected before shipment.
Precor ships the 719e climber in nine pieces:
•right and left handrails
•upper and lower handrail console/clamps
•electronic console display
•base column support (short tube)
•upright support (long tube)
•base
•hardware kit, owner’s manual, and warranty card
Diagram 1
The climber after unpacking.
Right and left handrails
Lower handrail clamp
Upper handrail console 
Stair arms
Electronic console display 
Upright support (long tube)
Base column support (short tube)
Base
Unpack the climber, placing all the pieces on the floor. For help in identifying the various pieces, refer to Diagram 1. The packet containing the hardware kit, owner’s manual, and warranty card is not shown.
Important: Do not pinch or crimp the reed switch cable during the unpacking or assembly processes.
page 4
