Cardio Theater Integrated Bracket Assembly Instructions
7.Connect the coaxial/power cable connectors to the LCD Screen.
Attach the connectors – coaxial, power, and DVD – to the back of the LCD Screen.
Note: If you do not have the DVD option, you can feed the DVD cable back into the pivot tube compartment so it is not hanging out.
8.Connect the controller cable.
Feed the controller cable through the front side of the pivot tube and attach it to the back of the LCD Screen.You will hear a definite click as the connector snaps into place inside its receptacle.
Note: For more information about cable connec- tions, refer to the Cardio Theater LCD Screen manual that was packaged with the product.
Important: If you purchased the DVD Integrated Bracket Option, you will want to install that option before you continue to the next section. Refer to the DVD Integrated Bracket Option Guide for assembly instructions.
7 |
|
| Power |
| connector |
Coaxial | DVD |
connector | connector |
Note: If you do not have the DVD option, you can feed the DVD cable back into the pivot tube compartment so it is not hanging out.
8 |
Controller |
cable |
Attach the LCD Screen
page 13
