C O M M E R C I A L P R O D U C T S D I V I S I O N

QUICKSTART: This key lets the user bypass the Setup prompts and start work- ing out immediately using the Manual course. Default values apply.

QUICKSTART Default Values

Prompts

Default Value

 

 

COURSE

Manual

TIME

Club dependent (usually 30 minutes - see page 25.)

WEIGHT

150 lbs. (68 kg.)

AGE

0 : A valid AGE must be entered to utilize the SmartRate®

 

display. If QUICKSTART is pressed after an AGE is entered,

 

then the SmartRate display will appear when a user wears the

 

POLAR® chest strap. If no AGE entry occurs, then SmartRate

 

LED’s light, but are not activated. Note that the POLAR® chest

 

strap is available through a Precor dealer. Refer to Obtaining

 

Service on page 7.

 

 

The QUICKSTART key can be pressed any time during the Setup prompts. For more information, refer to page 30, The Setup Mode and the QuickStart Feature.

ENTER: Workout specific prompts which appear on the display need to be addressed and then “entered” into the unit's memory by pressing the ENTER key. Refer to Quick Steps to Working Out on page 37.

SPEED ▼▲: During a workout, the SPEED keys let the user decrease or increase the running belt’s speed. The display can show a range from 0.5 to 11 miles per hour (1 to 18 kilometers per hour) and changes can be made in 0.1 increments from 1 to 11 mph (1 to 18 kph). The display indicates a speed of “0” when a user presses the SPEED key to stop the running belt.

Any time during a workout, the user can view the actual speed by lightly tapping either SPEED or key. His or her “pace” (minutes per mile or kilometer) appears in the left-most portion of the display. To change the speed, a user can hold the key down for more than two seconds.

During Setup mode, the SPEED ▼▲ keys are used for data selection. Pressing either or key changes what appears on the display, but does not affect the speed of the running belt. Refer to Setup Mode and Prompts on page 29.

page 34

Page 34
Image 34
Precor C934 owner manual Quickstart Default Values, Prompts Default Value