2

Setting Up the EC860 Professional

Recumbent Cycle

The EC860 Professional Recumbent Cycle comes fully assembled. You simply

need to follow the installation requirements listed in this section and place the

cycle in the appropriate location.

The cycle has a unique program that lets you determine which language and measurement system appears on the electronic console display. You can choose one of three languages: French, German, or English, and select either U.S. Standard or Metric as the measurement system. The Club Setting Program also enables you to limit workout time on the cycle so more people can use it. Instructions on how to use the program are found in this section.

Installation Requirements

Follow the installation requirements below when installing the cycle. If you do not install the cycle according to the following guidelines, you could void the Precor warranty.

Set up the EC860 cycle on a solid, flat surface.

Use the appropriate voltage outlet and grounding as specified on the cycle. The EC860 cycle is available in both 120-volt and 220-volt models. Refer to the cycle’s identification label to determine the voltage and fre- quency that your cycle needs.

CAUTION: Do not use a non-grounded outlet. Electrical damage might occur if the EC860 cycle is connected to an improper power source.

page 5

Page 5
Image 5
Precor owner manual Setting Up the EC860 Professional, Recumbent Cycle, Installation Requirements