Premier HV 15, HV 17, HV 13 operating instructions Guarantee, If machine unbalanced in operation

If fuses persistently blow or overload switch constantly trips.

•Remove any extension cables and try again. If the machine then operates correctly please contact our service department immediately regarding the correct specification of extension lead to be used.

•Ensure PV.4 model in question is being used in its correct role.SVR 15 MD Machines should not be used for stripping or scrubbing.motor works harder requiring more current.

•An excessive build up of polish/dirt on the floor produces a sticky surface. To overcome this drag, the motor works harder requiring more current. This can blow fuses particularly when using high velocity burnishing machines. Strip away polish/dirt and retreat the floor using a standard velocity scrubbing machine.

•Dirty or clogged brushes and pads can produce the same effect and should be cleaned.

If machine unbalanced in operation

•If machine is left standing on the brush or pad they can become distorted. Substitute an alternative or detach the damaged accessory and allow it to regain its shape.

•Brushes and pads should be an even thickness and the accessory chosen should be suitable for the task.

•Damaged or worn out accessories should be replaced.

Guarantee

All machines manufactured by Premiere Products Machine Division are guaranteed for a period of TWELVE MONTHS from the date of purchase by the user against all faults in materials or workmanship. This period can be extended to TWO YEARS provided a service contract is taken out at the time of purchase.

The Guarantee is not transferable. The liability under the Guarantee covers the repair or replacement of the machine or part thereof found to be defective.

No liability is accepted for insignificant deviations from normal standard which would not affect the value and safe operation of the machine or for damage caused by chemical or electrochemical action of water or any other abnormal environmental influences. No liability is accepted for damage to any component caused by accident, misuse, neglect or through the machine being operated on a voltage other than that stated on the serial plate.

No product liability is accepted and both Guarantee and approvals are invalidated if repairs are carried out other than by a Premiere Products Service Engineer or an approved service agent.

No product liability is accepted and both Guarantee and approvals are invalidated if replacement parts other than those supplied by Premiere Products are used during repair. The service engineer or agent is entirely responsible for ensuring the fitting of the correct replacement parts appropriate to the model being repaired. The decision as to whether the component part or machine will be repaired or replaced rests entirely with Premiere Products. Where defective parts have been repaired or replaced the Guarantee will not be extended beyond its original term.

All faulty parts which have been replaced under the terms of the Guarantee will become the property of Premiere Products.

Claims relating to damage caused to other property or persons will not be entertained unless Premiere Products are specifically required to do so by law.

Any claim under the terms of the Guarantee is subject to provision of proof of purchase.

No liability is accepted for the use or application of Premiere Products machinery, outside the specific recommendations given in the company’s printed publications.

No liability is accepted by Premiere Products for any advice given by distributors or service agents which exceeds the specific recommendations given in the company’s printed publications.

We continue to reserve the right to alter the designs of any products as part of a further process of improve- ment, and items supplied may therefore vary from those illustrated in this publication.

8