Fitting/Removing Accessories
For all HV Models
1 Tilt machine backwards so that handle rests on floor and base of machine is exposed - DIAGRAM1.
2 Offer up accessory so that triangular form aligns with that of mating drive.
3 Rotate accessory anti clockwise to secure - DIAGRAM2.
4 Place machine in upright position.
5 Rotate accessories clockwise to remove from machine.
WARNING
These appliances have been designed for use with accessories supplied by Premiere.
The fitting of alternative accessories may affect both safety and performance.
1
To fit Anti-splash Ring - DIAGRAMS 3 and 4.
1 Tilt machine backwards so that handle rests on floor and base of machine is exposed.
2Offer up
3Slide ring upwards until retaining brackets (B) locate over brush guard at base of machine.
4Pull top of ring forward and locate retaining bracket (C) over brush guard at top of machine.
5Fit accessory in normal manner.
6Place machine in upright position.
7Before operating machine ensure that retaining brackets (B) and
(C)are located over brush guard.
8To remove ring reverse fitting procedure.
2
CC
B
B
AA
3
4
4