I I I . I N S T A L L A T I O N
LIFT SYSTEM INSTALLATION
NOTE: The lift system is an
WARNING! The lift system should be installed by an authorized service technician only.
WARNING! At least two people should lift the lift system into the rear of the vehicle. Use proper lifting techniques and avoid lifting beyond your physical capability.
WARNING! Avoid pinch points! Do not hold the lift frame by the pivot points when installing the lift system.
NOTE: Footprint the mounting area along with the lift and mobility device to make sure all clearances pass above and below vehicle without any interference before starting installation.
NOTE: Use only the supplied hardware to install the lift system.
NOTE: To preserve
Follow these steps for installation:
1. Install the lift system securement system to the vehicle.
NOTE: Securement systems vary depending on vehicle manufacturer. Pride recommends use of only the securement system provided with the lift and that you follow all instructions provided by the manu- facturer for installation.
2.Connect the lift system to a power source. See “Wiring Harness Installation.”
3.Ensure that all mounting hardware is fully tightened and all required clearances have been achieved.
NOTE: The lift system may include an optional set of
NOTE: The lift system is equipped with a power base, which is an automated device designed to rotate the boom arm left and right.
8 | www.pridemobility.com | Commander 400 |