I X . C A R E A N D M A I N T E N A N C E
WHEEL REPLACEMENT
If your scooter is equipped with pneumatic tires and you have a flat tire, you can have the tube replaced. If your scooter is equipped with a solid tire insert, either the solid insert or the entire wheel must be replaced depending on the model. Contact your authorized Pride Provider for information regarding replacement wheels for your scooter.
WARNING! Wheels on your scooter should only be serviced/replaced by an authorized Pride Provider or quali- fied technician.
WARNING! Completely deflate pneu- matic tires before dismantling the rim or attempting repair.
WARNING! Be sure that the key is removed from the key switch and the scooter is not in freewheel mode before performing this procedure.
WARNING! When changing a tire, remove only the center lug nut, then remove the wheel. If any further dis- assembly is required, deflate the tire completely or it may explode.
DRIVE WHEEL | AXLE KEY |
NUT |
|
DRIVE WHEEL WASHER | |
Follow these easy steps for a quick and safe repair of both pneumatic and solid tires:
1. Remove the key from the key switch.
2. Elevate the side of the scooter from which you are removing the tire. Place wooden blocks under the frame to elevate the scooter.
3. If you are changing a pneumatic tire, completely deflate it before removing the wheel.
4. Remove the drive wheel nut and washer from the axle. See figure 25.
5. Pull the wheel off the axle.
6. Remove the nuts and washers and separate the rim halves. See figure 26.
7.Remove the old tube from the pneumatic tire and replace it with a new tube or replace the entire assembly if it is a solid tire.
8.Reassemble the rim halves.
9.Slide the wheel back onto the axle. Make sure that the axle key is in the axle slot. See figure 25.
WARNING! Failure to ensure that the axle key is properly installed into the axle slot when mounting the wheel can result in electronic brake failure, personal injury, and/or product damage.
Celebrity XL | www.pridemobility.com | 39 |
