Primera Technology II Hardware and Software Set-Up, Index, A. Installing The Pc Software

TOC INDEX

Section 2: Hardware and Software Set-Up

This section will describe the step-by-step process of setting up your Publisher. This includes information on how to load the supplies (ink and disc media) necessary to start producing discs.

A. INSTALLING THE PC SOFTWARE

The Installer Disc has a QuickStart menu that will guide you through the process of setting up your Publisher. Please refer to the following for more information on each step:

1.Place the Optical Disc Publisher Installer CD in your CD- Rom Drive. The Installer application should automatically launch in a few moments. If it does, proceed to Step 2.

If it does not automatically launch, follow these steps:

•Double-click the My Computer Icon, then double-click the icon of the appropriate CD drive containing the Software Installer disc

•Double-clickpostINSTALL.exe

2.In the Installer Application, click the QuickStart Install button. The QuickStart Install will guide you step-by-step through the installation process. As you complete each step, click Next. Steps 1-4 are shown in section C below as well as on the monitor. You may follow either to complete the setup.

B.INSTALLING THE MAC SOFTWARE

Before installing Discribe please note that all software must be installed on a hard disk. Once you have installed the software, store the original program CD-ROM in a safe place.

Please note that your user account must have administrative rights to properly install a new printer. You can check with your system administrator or check with Apple support to confirm whether or not your account has administrative rights.

Install the software as follows:

a.Insert the Bravo Installation CD-ROM in your system's CD-ROM drive.

b.Double-click the CD-ROM icon.

8 Hardware and Software Set-Up