TOC | INDEX |
c.
d.The volume containing the operating system should be selected for installation. Click the Continue button. All components will be installed to their proper locations.
e.Once the installation has completed, click Quit.
You have successfully installed all the necessary software! Section C below will describe how to connect the Bravo to your Mac.
C. HARDWARE SETUP
To connect your new disc publisher, please do the following:
Be sure you have removed the packing tape and cardboard insert prior to applying power.
Step 1: Applying Power
•Locate the power adapter supplied with your Publisher.
•Place one end of the adapter cord into the power port on the rear panel of the Publisher.
•Unit will initialize for approximately 30 seconds or so.
Step 2: Loading Media (Discs)
NOTE: Your Publisher can print directly onto virtually any brand of
Due to the wide variety of
Hardware and Software